From 9a5cea566908e80176a3c58b96fe8a349f474e93 Mon Sep 17 00:00:00 2001 From: Kovid Goyal Date: Fri, 9 Jun 2017 11:15:08 +0530 Subject: [PATCH] ... --- manual/server.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/manual/server.rst b/manual/server.rst index d6144d046d..2979107ce6 100644 --- a/manual/server.rst +++ b/manual/server.rst @@ -48,8 +48,8 @@ Accessing the server from devices on your home network After starting the server in calibre as described above, click the :guilabel:`Connect/share` button again. Instead of the :guilabel:`Start Content server` action, you should see a :guilabel:`Stop Content server` action -instead. To the right of this action will be listed an IP addresses -and port numbers. These look like a bunch of numbers separated by periods. For +instead. To the right of this action will be listed an IP address +and port number. These look like a bunch of numbers separated by periods. For example:: Stop Content server [192.168.1.5, port 8080] @@ -85,7 +85,7 @@ steps: #. Check that your device and computer are on the same network. This means they should both be connected to the same wireless router. In particular - neither should be using a cellular or WiFi broadband connection. + neither should be using a cellular or ISP provided direct-WiFi connection. #. If you have non-standard networking setup, it might be that the IP address shown on the :guilabel:`Connect/share` menu is incorrect.