Cutlery/calibre
1
0
Fork 0
mirror of https://github.com/kovidgoyal/calibre.git synced 2025-07-08 02:34:06 -04:00
Code Issues Packages Projects Releases Wiki Activity

Replace the old windows build notes

Browse Source
This commit is contained in:
Kovid Goyal 2015-12-08 16:03:59 +05:30
parent 7a4ea3e7f5
commit 9bd640e7ae
No known key found for this signature in database
GPG Key ID: 06BC317B515ACE7C
2 changed files with 222 additions and 796 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

456
setup/installer/windows/notes.rst
View File

@ -4,54 +4,58 @@ Notes on setting up the windows development environment
Overview Overview
---------- ----------
calibre and all its dependencies are compiled using Visual Studio 2008. All the calibre and all its dependencies are compiled using Visual Studio 2015. All the
following instructions must be run in a visual studio command prompt (the following instructions must be run in a visual studio command prompt (the
various commands use unix notation, so if you want to use them directly, you various commands use unix notation, so if you want to use them directly, you
have to setup cygwin). have to setup cygwin, as described below).
calibre contains build script to automate the building of the calibre calibre contains build script to automate the building of the calibre
installer. These scripts make certain assumptions about where dependencies are installer. These scripts make certain assumptions about where dependencies are
installed. Your best best is to setup a VM and replicate the paths mentioned installed. Your best best is to setup a VM and replicate the paths mentioned
below exactly. below exactly.
Microsoft Visual Studio and Windows SDK Microsoft Visual Studio
---------------------------------------- ----------------------------------------
You have to use Visual Studio 2008 as that is the version Python 2.x works 1) Install Visual Studio 2015 Community Edition **Update 1**
with. 2) If you are building 64bit, remember to use the 64bit version of the visual
You need Visual Studio 2008 Express Edition for 32-bit and Professional for 64
bit.
1) Install Visual Studio
2) Install Visual Studio SP1 from http://www.microsoft.com/en-us/download/details.aspx?id=10986
(First check if the version of VS 2008 you have is not already SP1)
3) Install The Windows SDK. You need to install a version that is built for VS
2008. Get it from here: http://www.microsoft.com/en-us/download/details.aspx?id=3138
4) If you are building 64bit, remember to use the 64bit version of the visual
studio command prompt. studio command prompt.
I've read that it is possible to use the 64-bit compiler that comes with the
Windows SDK With VS 2008 Express Edition, but I can't be bothered figuring it
out. Just use the Professional Edition.
Cygwin Cygwin
------------ ------------
This is needed for automation of the build process, and the ease of use of the This is needed for automation of the build process, and the ease of use of the
unix shell (bash). unix shell (zsh). Install it by running: https://www.cygwin.com/setup-x86_64.exe
Install vim, dos2unix, rsync, openssh, unzip, wget, make, zsh, bash-completion, curl at a minimum. In cygwin, install vim, dos2unix, rsync, openssh, unzip, wget, make, zsh, bash-completion, curl
After installing python run:: Run::
python setup/vcvars.py && echo 'source ~/.vcvars' >> ~/.zshrc mkdir -p ~/sw/bin ~/sw/sources ~/sw/build ~/sw/lib ~/sw/private ~/sw/include
To allow you to use the visual studio tools in the cygwin shell. Edit /etc/passwd and replace all occurrences of /bin/bash with /bin/zsh
Run::
Create a file ~/bin/winenv with the following::
cat << ' EOF' | sed -e 's/^ *//' > ~/bin/winenv
#!pycygrun
import os, subprocess, sys
env = os.environ.copy()
# Ensure windows based exes are used in preference to cygwin ones
parts = filter(lambda x: '\\cygwin64\\' not in x or '\\cygwin64\\home\\kovid\\sw\\' in x, env['PATH'].split(os.pathsep))
env['PATH'] = os.pathsep.join(parts)
args = sys.argv[1:]
if args[0].startswith('.'): args[0] = os.path.abspath(args[0])
p = subprocess.Popen(args, env=env)
raise SystemExit(p.wait())
EOF
chmod +x ~/bin/winenv
The following is only needed for automation (setting up ssh access to the The following is only needed for automation (setting up ssh access to the
windows machine). windows machine).
In order to build debug builds (.pdb files and sign files), you have to be able In order to build debug builds (.pdb files) and sign files, you have to be able
to login as the normal user account with ssh. To do this, follow these steps: to login as the normal user account with ssh. To do this, follow these steps:
* Setup a password for your user account * Setup a password for your user account
@ -93,66 +97,69 @@ to login as the normal user account with ssh. To do this, follow these steps:
Pass port 22 through Windows firewall. Create ~/.ssh/authorized_keys Pass port 22 through Windows firewall. Create ~/.ssh/authorized_keys
Get the calibre source code
------------------------------
Get the calibre source code::
mkdir -p ~/build && rm -rf calibre && cd ~/build && curl -L http://code.calibre-ebook.com/dist/src | tar xvJ && mv calibre-* calibre
Build python
----------------
Get nasm.exe (needed for openssl and libjpeg-turbo) from
http://www.nasm.us/pub/nasm/releasebuilds/2.11/win32/nasm-2.11-win32.zip
and put it in ~/sw/bin (which must be in PATH)::
chmod +x ~/sw/bin/nasm.exe
Install tortoise svn from http://tortoisesvn.net/downloads.html
Install git for windows from https://git-scm.com/download/win
Get a customized version of python that compiles with VS 2015, like this::
git clone --depth 1 https://github.com/kovidgoyal/cpython.git && cd cpython && git checkout 2.7
PlatformToolset below corresponds to the version of Visual Studio, here 2015 (14.0)
We create externals/nasm-2.11.06 below so that the python build script does not
try to download its own nasm instead using the one we installed above (the python
build script fails to mark its nasm as executable, and therefore errors out)
First run::
echo 'set PROGRAMFILES(x86)=%PROGRAMFILES% (x86)' > run.bat && \
echo 'PCbuild\\build.bat -e --no-tkinter -c Release -p %1 -t Build "/p:PlatformToolset=v140"' >> run.bat && \
mkdir -p externals/nasm-2.11.06 && \
chmod +x run.bat
For 64-bit ::
./run.bat x64 || echo '\n\nPython compilation failed!'
./PCbuild/amd64/python.exe Lib/test/regrtest.py -u network,cpu,subprocess,urlfetch
./PCbuild/amd64/python.exe /cygwin64/home/kovid/build/calibre/setup/installer/windows/install_python.py /cygwin64/home/kovid/sw/private
For 32-bit::
./run.bat Win32 || echo '\n\nPython compilation failed!'
./PCbuild/python.exe Lib/test/regrtest.py -u network,cpu,subprocess,urlfetch
./PCbuild/python.exe /cygwin64/home/kovid/build/calibre/setup/installer/windows/install_python.py /cygwin64/home/kovid/sw/private
Make sure ~/sw/private/python is in your PATH
Basic dependencies Basic dependencies
-------------------- --------------------
Install cmake, python, WiX (WiX is used to generate the .msi installer) Install cmake, WiX (WiX is used to generate the .msi installer)
You have to You have to
Set CMAKE_PREFIX_PATH environment variable to C:\cygwin\home\kovid\sw Set CMAKE_PREFIX_PATH environment variable to C:\cygwin64\home\kovid\sw
This is where all dependencies will be installed. This is where all dependencies will be installed.
Add C:\Python27\Scripts and C:\Python27 to PATH Run::
python /cygwin64/home/kovid/build/calibre/setup/vcvars.py > ~/.vcvars
Edit /cygdrive/c/Python27/Lib/mimetypes.py and set _winreg = None to prevent reading Add `source ~/.vcvars` to `~/.zshenv`
of mimetypes from the windows registry This will allow you to use the Visual Studio tools in the cygwin shell.
Python packages
------------------
Install setuptools from http://pypi.python.org/pypi/setuptools. Use the source
tarball. Edit setup.py and set zip_safe=False. Then run::
python setup.py install
Run the following command to install python dependencies::
easy_install --always-unzip -U mechanize python-dateutil dnspython cssutils clientform pycrypto pygments
Install pyreadline from https://pypi.python.org/pypi/pyreadline/2.0
Install pywin32 and edit win32com\__init__.py setting _frozen = True and
__gen_path__ to a temp dir (otherwise it tries to set it to a dir in the
install tree which leads to permission errors)
Note that you should use::
import tempfile
__gen_path__ = os.path.join(
tempfile.gettempdir(), "gen_py",
"%d.%d" % (sys.version_info[0], sys.version_info[1]))
Use gettempdir instead of the win32 api method as gettempdir returns a temp dir
that is guaranteed to actually work.
Also edit win32com\client\gencache.py and change the except IOError on line 57
to catch all exceptions.
SQLite
---------
Put sqlite3*.h from the sqlite windows amalgamation in ~/sw/include
APSW
-----
Download source from http://code.google.com/p/apsw/downloads/list and run
python setup.py fetch --all --missing-checksum-ok build --enable-all-extensions install test
Build requirements
-------------------
Install perl and ruby (needed to build openssl and qt): Install perl and ruby (needed to build openssl and qt):
Perl: http://www.activestate.com/activeperl Perl: http://www.activestate.com/activeperl
@ -160,35 +167,75 @@ Ruby: http://rubyinstaller.org/
Put both perl.exe and ruby.exe in the PATH Put both perl.exe and ruby.exe in the PATH
Get nasm.exe from (needed for openssl and libjpeg-turbo)
http://www.nasm.us/pub/nasm/releasebuilds/2.11/win32/nasm-2.11-win32.zip setuptools
and put it in ~/sw/bin (which must be in PATH) --------------
Download and extract setuptools from https://pypi.python.org/pypi/setuptools/
Run::
cd ~/sw/build/setuptools-* && sed -i.bak 's/zip_safe\s*=\s*True/zip_safe=False/' setup.py && \
python setup.py install
Miscellaneous python packages
--------------------------------------
Run::
~/sw/private/python/Scripts/easy_install.exe --always-unzip -U python-dateutil dnspython mechanize pygments pyreadline pycrypto
# cssutils install has a harmless error, so do it separately
~/sw/private/python/Scripts/easy_install.exe --always-unzip -U cssutils
pywin32
----------
Run::
git clone --depth 1 https://github.com/kovidgoyal/pywin32.git
chmod +x swig/swig.exe
export plat= win32 or win-amd64
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat;
# Do this repeatedly until you stop getting .manifest file errors
python setup.py -q install
rm ~/sw/private/python/Lib/site-packages/*.chm
SQLite
---------
https://www.sqlite.org/download.html
Put sqlite3*.h from the sqlite windows amalgamation in ~/sw/include
APSW
-----
https://github.com/rogerbinns/apsw/releases
python setup.py fetch --all --missing-checksum-ok build --enable-all-extensions install test
OpenSSL OpenSSL
-------- --------
Download and untar the openssl tarball. https://www.openssl.org/source/
To install use a private prefix: --prefix=C:/cygwin64/home/kovid/sw/private/openssl
The following *MUST BE RUN* in a Visual Studio Command prompt and not in a cygwin
environment.
For 32-bit:: For 32-bit::
perl Configure VC-WIN32 no-asm enable-static-engine --prefix=C:/cygwin64/home/kovid/sw/private/openssl winenv perl Configure VC-WIN32 enable-static-engine --prefix=C:/cygwin64/home/kovid/sw/private/openssl && \
ms\do_ms.bat && nmake -f ms\ntdll.mak && nmake -f ms\ntdll.mak test && nmake -f ms\ntdll.mak install winenv ms\\do_ms.bat && winenv nmake -f ms\\ntdll.mak && winenv nmake -f ms\\ntdll.mak test && winenv nmake -f ms\\ntdll.mak install
For 64-bit:: For 64-bit::
perl Configure VC-WIN64A no-asm enable-static-engine --prefix=C:/cygwin64/home/kovid/sw/private/openssl winenv perl Configure VC-WIN64A enable-static-engine --prefix=C:/cygwin64/home/kovid/sw/private/openssl && \
ms\do_win64a.bat && nmake -f ms\ntdll.mak && nmake -f ms\ntdll.mak test && nmake -f ms\ntdll.mak install winenv ms\\do_win64a.bat && winenv nmake -f ms\\ntdll.mak && winenv nmake -f ms\\ntdll.mak test && winenv nmake -f ms\\ntdll.mak install
ICU ICU
------- -------
Download the win32 *source* .zip from http://www.icu-project.org/download Download the win32 *source* .zip from http://www.icu-project.org/download
Extract to C:\cygwin64\home\kovid\sw\private\icu Extract to `~/sw/private`
The following must be run in the VS Command Prompt, not the cygwin ssh shell The following *must be run in the VS Command Prompt*, not the cygwin shell
cd to <ICU>\source:: cd to <ICU>\source::
@ -206,19 +253,18 @@ zlib
http://www.zlib.net/ http://www.zlib.net/
Build with:: Build with::
nmake -f win32/Makefile.msc winenv nmake -f win32/Makefile.msc && \
nmake -f win32/Makefile.msc test nmake -f win32/Makefile.msc test && \
cp zlib1.dll* ~/sw/bin && cp zlib.lib zdll.* ~/sw/lib/ && cp zconf.h zlib.h ~/sw/include/ cp zlib1.dll* ~/sw/bin && cp zlib.lib zdll.* ~/sw/lib/ && cp zconf.h zlib.h ~/sw/include/
jpeg-8 jpeg-8
------- -------
Get the source code from: http://sourceforge.net/projects/libjpeg-turbo/files/ Get the source code from: https://github.com/libjpeg-turbo/libjpeg-turbo/releases
Run:: Run::
chmod +x cmakescripts/* && mkdir -p build && cd build chmod +x cmakescripts/* && mkdir -p build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWITH_JPEG8=1 .. cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWITH_JPEG8=1 .. && \
nmake nmake && \
cp sharedlib/jpeg8.dll* ~/sw/bin/ && cp sharedlib/jpeg.lib ~/sw/lib/ && cp jconfig.h ../jerror.h ../jpeglib.h ../jmorecfg.h ~/sw/include cp sharedlib/jpeg8.dll* ~/sw/bin/ && cp sharedlib/jpeg.lib ~/sw/lib/ && cp jconfig.h ../jerror.h ../jpeglib.h ../jmorecfg.h ~/sw/include
libpng libpng
@ -228,89 +274,51 @@ Download the libpng .zip source file from:
http://www.libpng.org/pub/png/libpng.html http://www.libpng.org/pub/png/libpng.html
Run:: Run::
cmake -G "NMake Makefiles" -DPNG_SHARED=1 -DCMAKE_BUILD_TYPE=Release -DZLIB_INCLUDE_DIR=C:/cygwin64/home/kovid/sw/include -DZLIB_LIBRARY=C:/cygwin64/home/kovid/sw/lib/zdll.lib . cmake -G "NMake Makefiles" -DPNG_SHARED=1 -DCMAKE_BUILD_TYPE=Release -DZLIB_INCLUDE_DIR=C:/cygwin64/home/kovid/sw/include -DZLIB_LIBRARY=C:/cygwin64/home/kovid/sw/lib/zdll.lib . && \
nmake nmake && cp libpng*.dll ~/sw/bin/ && cp libpng*.lib ~/sw/lib/ && cp pnglibconf.h png.h pngconf.h ~/sw/include/
cp libpng*.dll ~/sw/bin/ && cp libpng*.lib ~/sw/lib/ && cp pnglibconf.h png.h pngconf.h ~/sw/include/
freetype freetype
----------- -----------
Get the .zip source from: http://download.savannah.gnu.org/releases/freetype/ Get the source from: http://download.savannah.gnu.org/releases/freetype/
Edit *all copies* of the file ftoption.h and add to generate a .lib The following will build freetype both as a static (freetype262MT.lib) and as a dynamic library (freetype.dll and freetype.lib)
and a correct dll
#define FT_EXPORT(return_type) __declspec(dllexport) return_type Run::
#define FT_EXPORT_DEF(return_type) __declspec(dllexport) return_type find . -name ftoption.h -exec sed -i.bak '/FT_BEGIN_HEADER/a #define FT_EXPORT(x) __declspec(dllexport) x\n#define FT_EXPORT_DEF(x) __declspec(dllexport) x' {} \;
winenv devenv builds/windows/vc2010/freetype.sln /upgrade
VS 2008 .sln file is present, open it export PL=x64 (change to Win32 for 32 bit build)
winenv msbuild.exe builds/windows/vc2010/freetype.sln /t:Build /p:Platform=$PL /p:Configuration="Release Multithreaded"
* If you are doing x64 build, click the Win32 dropdown, select rm -f ~/sw/lib/freetype*; cp ./objs/vc2010/$PL/freetype*MT.lib ~/sw/lib/
Configuration manager->Active solution platform -> New -> x64 rm -rf ~/sw/include/freetype2; cp -rf include ~/sw/include/freetype2 && rm -rf ~/sw/include/freetype2/internal
sed -i.bak s/StaticLibrary/DynamicLibrary/ builds/windows/vc2010/freetype.vcxproj
* Change active build type to release multithreaded winenv msbuild.exe builds/windows/vc2010/freetype.sln /t:Build /p:Platform=$PL /p:Configuration="Release Multithreaded"
rm -f ~/sw/bin/freetype*; cp ./objs/vc2010/$PL/freetype*MT.dll ~/sw/bin/ && cp ./objs/vc2010/$PL/freetype*MT.lib ~/sw/lib/freetype.lib
* Project->Properties->Configuration Properties change configuration type
to dll and build solution
cp "`find . -name freetype.dll`" ~/sw/bin/ && cp "`find . -name freetype.lib`" ~/sw/lib/
Now change configuration back to static for .lib and build solution
cp "`find . -name 'freetype*MT.lib'`" ~/sw/lib/
cp -rf include ~/sw/include/freetype2 && rm -rf ~/sw/include/freetype2/internal
TODO: Test if this bloody thing actually works on 64 bit (apparently freetype
assumes sizeof(long) == sizeof(ptr) which is not true in Win64. See for
example: http://forum.openscenegraph.org/viewtopic.php?t=2880
expat expat
-------- --------
Get from: http://sourceforge.net/projects/expat/files/expat/ Get from: http://sourceforge.net/projects/expat/files/expat/
Apparently expat requires stdint.h which VS 2008 does not have. So we get our
own.
Run:: Run::
cd lib && wget http://msinttypes.googlecode.com/svn/trunk/stdint.h && cd .. mkdir -p build && cd build && \
mkdir -p build && cd build cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release .. && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release .. nmake && \
nmake cp expat.dll ~/sw/bin/ && cp expat.lib ~/sw/lib/ && \
cp expat.dll ~/sw/bin/ && cp expat.lib ~/sw/lib/
cp ../lib/expat.h ../lib/expat_external.h ~/sw/include cp ../lib/expat.h ../lib/expat_external.h ~/sw/include
libiconv
----------
Run::
mkdir vs2008 && cd vs2008
Then follow these instructions:
http://www.codeproject.com/Articles/302012/How-to-Build-libiconv-with-Microsoft-Visual-Studio
NOTE: Built as MT rather than MD so no manifest
Change the type to Release and config to x64 or Win32 and Build solution and
then::
cp "`find . -name '*.dll'`" ~/sw/bin/
cp "`find . -name '*.lib'`" ~/sw/lib/iconv.lib
cp "`find . -name iconv.h`" ~/sw/include/
Information for using a static version of libiconv is at the link above.
libxml2 libxml2
------------- -------------
Get it from: ftp://xmlsoft.org/libxml2/ Get it from: ftp://xmlsoft.org/libxml2/
Run:: Run::
cd win32 cd win32 && \
cscript.exe configure.js include=C:/cygwin64/home/kovid/sw/include lib=C:/cygwin64/home/kovid/sw/lib prefix=C:/cygwin64/home/kovid/sw zlib=yes iconv=yes cscript.exe configure.js include=C:/cygwin64/home/kovid/sw/include lib=C:/cygwin64/home/kovid/sw/lib prefix=C:/cygwin64/home/kovid/sw zlib=yes iconv=no && \
nmake /f Makefile.msvc winenv nmake /f Makefile.msvc && \
cd .. cd .. && \
mkdir -p ~/sw/include/libxml2/libxml && cp include/libxml/*.h ~/sw/include/libxml2/libxml/ rm -rf ~/sw/include/libxml2; mkdir -p ~/sw/include/libxml2/libxml && cp include/libxml/*.h ~/sw/include/libxml2/libxml/ && \
find . -type f \( -name "*.dll" -o -name "*.dll.manifest" \) -exec cp "{}" ~/sw/bin/ \; find . -type f \( -name "*.dll" -o -name "*.dll.manifest" \) -exec cp "{}" ~/sw/bin/ \; && \
find . -name libxml2.lib -exec cp "{}" ~/sw/lib/ \; find . -name libxml2.lib -exec cp "{}" ~/sw/lib/ \;
libxslt libxslt
@ -319,14 +327,15 @@ libxslt
Get it from: ftp://xmlsoft.org/libxml2/ Get it from: ftp://xmlsoft.org/libxml2/
Run:: Run::
cd win32 cd win32 && \
cscript.exe configure.js include=C:/cygwin64/home/kovid/sw/include include=C:/cygwin64/home/kovid/sw/include/libxml2 lib=C:/cygwin64/home/kovid/sw/lib prefix=C:/cygwin64/home/kovid/sw zlib=yes iconv=yes cscript.exe configure.js include=C:/cygwin64/home/kovid/sw/include include=C:/cygwin64/home/kovid/sw/include/libxml2 lib=C:/cygwin64/home/kovid/sw/lib prefix=C:/cygwin64/home/kovid/sw zlib=yes iconv=no &&\
nmake /f Makefile.msvc sed -i 's/#define snprintf _snprintf//' ../libxslt/win32config.h && \
mkdir -p ~/sw/include/libxslt ~/sw/include/libexslt find . -name 'Makefile*' -exec sed -i 's|/OPT:NOWIN98||' {} \; && \
cd .. winenv nmake /f Makefile.msvc && \
cp libxslt/*.h ~/sw/include/libxslt/ rm -rf ~/sw/include/libxslt; mkdir -p ~/sw/include/libxslt ~/sw/include/libexslt && \
cp libexslt/*.h ~/sw/include/libexslt/ cd .. && \
find . -type f \( -name "*.dll" -o -name "*.dll.manifest" \) -exec cp "{}" ~/sw/bin/ \; cp libxslt/*.h ~/sw/include/libxslt/ && cp libexslt/*.h ~/sw/include/libexslt/ && \
find . -type f \( -name "*.dll" -o -name "*.dll.manifest" \) -exec cp "{}" ~/sw/bin/ \; && \
find . -name 'lib*xslt.lib' -exec cp "{}" ~/sw/lib/ \; find . -name 'lib*xslt.lib' -exec cp "{}" ~/sw/lib/ \;
lxml lxml
@ -339,7 +348,7 @@ library_dirs() function to return::
return ['C:/cygwin64/home/kovid/sw/lib'] return ['C:/cygwin64/home/kovid/sw/lib']
and the include_dirs() function to return and the include_dirs() function to return::
return ['C:/cygwin64/home/kovid/sw/include/libxml2', 'C:/cygwin64/home/kovid/sw/include'] return ['C:/cygwin64/home/kovid/sw/include/libxml2', 'C:/cygwin64/home/kovid/sw/include']
@ -364,66 +373,46 @@ Build and install with::
poppler poppler
------------- -------------
mkdir build http://poppler.freedesktop.org
Run the cmake GUI which will find the various dependencies automatically. Edit poppler/poppler-config.h.cmake removing the macro definition of fmax (it
On 64 bit cmake might not let you choose Visual Studio 2008, in whcih case is present in VS 2015 and the macro def causes errors)
leave the source field blank, click configure choose Visual Studio 2008 and
then enter the source field.
In cmake: disable GTK, Qt, openjpeg, cpp, lcms, gtk_tests, qt_tests. Enable Run::
jpeg, png and zlib:: sed -i 's/#define snprintf _snprintf/#include <algorithm>/' config.h.cmake && \
mkdir build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DENABLE_CPP=0 .. && \
nmake && cp utils/*.exe* ~/sw/bin
cp build/utils/Release/*.exe ~/sw/bin
podofo podofo
---------- ----------
Download from http://podofo.sourceforge.net/download.html Download from http://podofo.sourceforge.net/download.html
mkdir build
Add the following three lines near the top of CMakeLists.txt
SET(WANT_LIB64 FALSE)
SET(PODOFO_BUILD_SHARED TRUE)
SET(PODOFO_BUILD_STATIC FALSE)
PoDoFo's CMakeLists.txt is pretty bad. Run the cmake-gui and fill in values for
freetype2 and open ssl (choose any one .lib for the libcrypto variable, you
will have to fix it manually in Visual Studio later anyway). Then generate the
VisualStudio solution. In the solution. In the Solution got to
Project->Properties->Linker->Input and add the second ssl library. And in
C++->General add the openssl include dir.
Now build only the project podofo_shared (release mode)
Run:: Run::
cp "`find . -name '*.dll'`" ~/sw/bin/ mkdir build && cd build && \
cp "`find . -name '*.lib'`" ~/sw/lib/ cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWANT_LIB64=FALSE -DPODOFO_BUILD_SHARED=TRUE -DPODOFO_BUILD_STATIC=False -DFREETYPE_INCLUDE_DIR="C:/cygwin64/home/kovid/sw/include/freetype2" .. && \
mkdir ~/sw/include/podofo nmake podofo_shared && \
cp build/podofo_config.h ~/sw/include/podofo rm -rf ~/sw/include/podofo; mkdir ~/sw/include/podofo && cp podofo_config.h ~/sw/include/podofo && cp -r ../src/* ~/sw/include/podofo/ && \
cp -r src/* ~/sw/include/podofo/ cp "`find . -name '*.dll'`" ~/sw/bin/ && cp "`find . -name '*.lib'`" ~/sw/lib/
netifaces netifaces
------------ ------------
https://pypi.python.org/pypi/netifaces
Download the source tarball from http://alastairs-place.net/projects/netifaces/
Run:: Run::
python setup.py build python setup.py build && cp `find build/ -name '*.pyd'` ~/sw/private/python/Lib/site-packages/
cp `find build/ -name '*.pyd'` /cygdrive/c/Python27/Lib/site-packages/
psutil psutil
-------- --------
https://pypi.python.org/pypi/psutil
Download the source tarball Run::
Run python setup.py build && rm -rf ~/sw/private/python/Lib/site-packages/psutil && cp -r build/lib.win*/psutil ~/sw/private/python/Lib/site-packages/
Python setup.py build
cp -r build/lib.win*/* /cygdrive/c/Python27/Lib/site-packages/
easylzma easylzma
---------- ----------
@ -441,13 +430,15 @@ chmlib
Download the zip source code from: http://www.jedrea.com/chmlib/ Download the zip source code from: http://www.jedrea.com/chmlib/
Run:: Run::
cd src && unzip ../ChmLib-ds6.zip cd src && unzip ../ChmLib-ds6.zip
Then open ChmLib.dsw in Visual Studio, change the configuration to Release winenv devenv ChmLib.dsw /upgrade
Then open ChmLib.sln in Visual Studio, change the configuration to Release
(Win32|x64) and build solution, this will generate a static library in (Win32|x64) and build solution, this will generate a static library in
Release/ChmLib.lib Release/ChmLib.lib
Qt Qt
-------- --------
Download Qt sourcecode (.zip) from: http://download.qt-project.org/official_releases/qt/ Download Qt (5.5.1) sourcecode (.zip) from: http://download.qt-project.org/official_releases/qt/
* Extract it to C:\qt (the default location for building $SW/build) does * Extract it to C:\qt (the default location for building $SW/build) does
not work as Qt's build system generates paths that are too long for not work as Qt's build system generates paths that are too long for
@ -455,21 +446,15 @@ Download Qt sourcecode (.zip) from: http://download.qt-project.org/official_rele
* Make sure the folder containing the ICU dlls is in the PATH. ($SW/private/icu/source/lib) * Make sure the folder containing the ICU dlls is in the PATH. ($SW/private/icu/source/lib)
* Edit qtwinextras/src/winextras/winshobjidl_p.h and comment out the
declaration of SHARDAPPIDINFOLINK (just replace the containing ifdef with
#if 0). This struct is already defined in the header files from the
windows sdk and this redefinition will cause a compiler error.
* VS 2008 does not have stdint.h which WebKit needs, so run the following::
wget -O qtwebkit/Source/ThirdParty/leveldb/include/stdint.h 'http://msinttypes.googlecode.com/svn/trunk/stdint.h'
cp qtwebkit/Source/ThirdParty/leveldb/include/stdint.h qtwebkit/Source/JavaScriptCore/os-win32
* Slim down Qt by not building various things we dont need. Edit * Slim down Qt by not building various things we dont need. Edit
:file:`qtwebkit/Tools/qmake/mkspecs/features/configure.prf` and remove :file:`qtwebkit/Tools/qmake/mkspecs/features/configure.prf` and remove
build_webkit2. Edit qt.pro and comment out the addModule() lines for build_webkit2. Edit qt.pro and comment out the addModule() lines for
qtxmlpatterns, qtdeclarative, qtquick1, qttools, qtwebsockets, qtwebchannel, qtxmlpatterns, qtdeclarative, qtquickcontrols, qtfeedback,
qtwebengine. Change the addModule line for qtwebkit to depend on qtbase qtpim, qtwebsockets, qtwebchannel, qttools, qtwebkit-examples, qt3d,
instead of qtdeclarative anf remove qtwebchannel qt-canvas3d, qtgraphicaleffects, qtscript, qtquick1, qtdocgallery,
qtwayland, qtenginio, qtwebengine, qtdoc. Change the addModule line for
qtwebkit to depend only on qtbase and qtmultimedia. Remove qtdeclarative
from all addModule() lines where is is an optional dependency.
* Qt uses its own routine to locate and load "system libraries" including * Qt uses its own routine to locate and load "system libraries" including
the openssl libraries needed for "Get Books". This means that we have to the openssl libraries needed for "Get Books". This means that we have to
@ -483,6 +468,7 @@ Download Qt sourcecode (.zip) from: http://download.qt-project.org/official_rele
#if !defined(QT_BOOTSTRAPPED) #if !defined(QT_BOOTSTRAPPED)
if (!onlySystemDirectory) if (!onlySystemDirectory)
- searchOrder << QFileInfo(qAppFileName()).path(); - searchOrder << QFileInfo(qAppFileName()).path();
+ searchOrder << (QFileInfo(qAppFileName()).path().replace(QLatin1Char('/'), QLatin1Char('\\')) + QString::fromLatin1("\\app\\DLLs\\"));
+ searchOrder << (QFileInfo(qAppFileName()).path().replace(QLatin1Char('/'), QLatin1Char('\\')) + QString::fromLatin1("\\DLLs\\")); + searchOrder << (QFileInfo(qAppFileName()).path().replace(QLatin1Char('/'), QLatin1Char('\\')) + QString::fromLatin1("\\DLLs\\"));
#endif #endif
searchOrder << qSystemDirectory(); searchOrder << qSystemDirectory();
@ -492,10 +478,10 @@ Download Qt sourcecode (.zip) from: http://download.qt-project.org/official_rele
Now, run configure and make (we have to make sure the windows perl and not cygwin perl is used):: Now, run configure and make (we have to make sure the windows perl and not cygwin perl is used)::
chmod +x configure.bat qtbase/configure.* gnuwin32/bin/* chmod +x configure.bat qtbase/configure.* gnuwin32/bin/*
rm -rf build && mkdir -p build && cd build rm -rf build && mkdir build && cd build
PATH=`ls -d /cygdrive/c/Perl*/bin`:$PATH ../configure.bat -prefix $SW/private/qt -ltcg -opensource -release -platform win32-msvc2008 -mp -confirm-license -nomake examples -nomake tests -no-plugin-manifests -icu -openssl -I $SW/private/openssl/include -L $SW/private/openssl/lib -I $SW/private/icu/source/common -I $SW/private/icu/source/i18n -L $SW/private/icu/source/lib -no-angle -opengl desktop winenv ../configure.bat -prefix C:/cygwin64/home/kovid/sw/private/qt -ltcg -opensource -release -platform win32-msvc2015 -mp -confirm-license -nomake examples -nomake tests -no-plugin-manifests -icu -openssl -I C:/cygwin64/home/kovid/sw/private/openssl/include -L C:/cygwin64/home/kovid/sw/private/openssl/lib -I C:/cygwin64/home/kovid/sw/private/icu/source/common -I C:/cygwin64/home/kovid/sw/private/icu/source/i18n -L C:/cygwin64/home/kovid/sw/private/icu/source/lib -no-angle -opengl desktop
PATH=`ls -d /cygdrive/c/Perl*/bin`:/cygdrive/c/qt/gnuwin32/bin:$PATH nmake PATH=/cygdrive/c/qt/gnuwin32/bin:$PATH winenv nmake
rm -rf $SW/private/qt && nmake install rm -rf ~/sw/private/qt && nmake install
Add $SW/private/qt/bin to PATH Add $SW/private/qt/bin to PATH
@ -504,7 +490,7 @@ SIP
Available from: http://www.riverbankcomputing.co.uk/software/sip/download :: Available from: http://www.riverbankcomputing.co.uk/software/sip/download ::
python configure.py -p win32-msvc2008 && nmake && nmake install python configure.py -p win32-msvc2015 && winenv nmake && nmake install
PyQt5 PyQt5
---------- ----------
@ -512,8 +498,8 @@ PyQt5
Compiling instructions:: Compiling instructions::
rm -rf build && mkdir build && cd build rm -rf build && mkdir build && cd build
python ../configure.py -c -j5 --no-designer-plugin --no-qml-plugin --verbose --confirm-license winenv python ../configure.py -c -j5 --no-designer-plugin --no-qml-plugin --verbose --confirm-license
nmake && rm -rf /cygdrive/c/Python27/Lib/site-packages/PyQt5 && nmake install winenv nmake && rm -rf ~/sw/private/python/Lib/site-packages/PyQt5 && nmake install
libimobiledevice libimobiledevice
@ -523,22 +509,22 @@ See libimobiledevice_notes.rst
optipng optipng
---------- ----------
http://optipng.sourceforge.net/
Compiling instructions:: Compiling instructions::
sed -i.bak 's/\$</%s/' src/libpng/scripts/makefile.vcwin32 sed -i.bak 's/\$</%s/' src/libpng/scripts/makefile.vcwin32 && \
nmake -f build/visualc.mk winenv nmake -f build/visualc.mk && \
cp src/optipng/optipng.exe* ~/sw/bin cp src/optipng/optipng.exe ~/sw/bin/optipng-calibre.exe
mozjpeg mozjpeg
---------- ----------
https://github.com/mozilla/mozjpeg/releases
Compiling instructions:: Compiling instructions::
mkdir -p build && cd build mkdir -p build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWITH_TURBOJPEG:BOOL=FALSE .. cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWITH_TURBOJPEG:BOOL=FALSE .. && \
nmake nmake && \
cp jpegtran-static.exe ~/sw/bin/jpegtran-calibre.exe cp jpegtran-static.exe ~/sw/bin/jpegtran-calibre.exe && \
cp cjpeg-static.exe ~/sw/bin/cjpeg-calibre.exe cp cjpeg-static.exe ~/sw/bin/cjpeg-calibre.exe
calibre calibre

560
setup/installer/windows/notes2.rst
View File

@ -1,560 +0,0 @@
Notes on setting up the windows development environment
========================================================
Overview
----------
calibre and all its dependencies are compiled using Visual Studio 2015. All the
following instructions must be run in a visual studio command prompt (the
various commands use unix notation, so if you want to use them directly, you
have to setup cygwin, as described below).
calibre contains build script to automate the building of the calibre
installer. These scripts make certain assumptions about where dependencies are
installed. Your best best is to setup a VM and replicate the paths mentioned
below exactly.
Microsoft Visual Studio
----------------------------------------
1) Install Visual Studio 2015 Community Edition **Update 1**
2) If you are building 64bit, remember to use the 64bit version of the visual
studio command prompt.
Cygwin
------------
This is needed for automation of the build process, and the ease of use of the
unix shell (zsh). Install it by running: https://www.cygwin.com/setup-x86_64.exe
In cygwin, install vim, dos2unix, rsync, openssh, unzip, wget, make, zsh, bash-completion, curl
Run::
mkdir -p ~/sw/bin ~/sw/sources ~/sw/build ~/sw/lib ~/sw/private ~/sw/include
Edit /etc/passwd and replace all occurrences of /bin/bash with /bin/zsh
Run::
Create a file ~/bin/winenv with the following::
cat << ' EOF' | sed -e 's/^ *//' > ~/bin/winenv
#!pycygrun
import os, subprocess, sys
env = os.environ.copy()
# Ensure windows based exes are used in preference to cygwin ones
parts = filter(lambda x: '\\cygwin64\\' not in x or '\\cygwin64\\home\\kovid\\sw\\' in x, env['PATH'].split(os.pathsep))
env['PATH'] = os.pathsep.join(parts)
args = sys.argv[1:]
if args[0].startswith('.'): args[0] = os.path.abspath(args[0])
p = subprocess.Popen(args, env=env)
raise SystemExit(p.wait())
EOF
chmod +x ~/bin/winenv
The following is only needed for automation (setting up ssh access to the
windows machine).
In order to build debug builds (.pdb files) and sign files, you have to be able
to login as the normal user account with ssh. To do this, follow these steps:
* Setup a password for your user account
* Follow the steps here:
http://pcsupport.about.com/od/windows7/ht/auto-logon-windows-7.htm or
http://pcsupport.about.com/od/windowsxp/ht/auto-logon-xp.htm to allow the
machine to bootup without having to enter the password
* The following steps must all be run in an administrator cygwin shell
* First clean out any existing cygwin ssh setup with::
net stop sshd
cygrunsrv -R sshd
net user sshd /DELETE
net user cyg_server /DELETE (delete any other cygwin users account you
can list them with net user)
rm -R /etc/ssh*
mkpasswd -cl > /etc/passwd
mkgroup --local > /etc/group
* Assign the necessary rights to the normal user account (administrator
cygwin command prompt needed - editrights is available in \cygwin\bin)::
editrights.exe -a SeAssignPrimaryTokenPrivilege -u kovid
editrights.exe -a SeCreateTokenPrivilege -u kovid
editrights.exe -a SeTcbPrivilege -u kovid
editrights.exe -a SeServiceLogonRight -u kovid
* Run::
ssh-host-config
And answer (yes) to all questions. If it asks do you want to use a
different user name, specify the name of your user account and enter
username and password (it asks on Win 7 not on Win XP)
* On Windows XP, I also had to run::
passwd -R
to allow sshd to use my normal user account even with public key
authentication. See http://cygwin.com/cygwin-ug-net/ntsec.html for
details. On Windows 7 this wasn't necessary for some reason.
* Start sshd with::
net start sshd
* See http://www.kgx.net.nz/2010/03/cygwin-sshd-and-windows-7/ for details
Pass port 22 through Windows firewall. Create ~/.ssh/authorized_keys
Get the calibre source code
------------------------------
Get the calibre source code::
mkdir -p ~/build && rm -rf calibre && cd ~/build && curl -L http://code.calibre-ebook.com/dist/src | tar xvJ && mv calibre-* calibre
Build python
----------------
Get nasm.exe (needed for openssl and libjpeg-turbo) from
http://www.nasm.us/pub/nasm/releasebuilds/2.11/win32/nasm-2.11-win32.zip
and put it in ~/sw/bin (which must be in PATH)::
chmod +x ~/sw/bin/nasm.exe
Install tortoise svn from http://tortoisesvn.net/downloads.html
Install git for windows from https://git-scm.com/download/win
Get a customized version of python that compiles with VS 2015, like this::
git clone --depth 1 https://github.com/kovidgoyal/cpython.git && cd cpython && git checkout 2.7
PlatformToolset below corresponds to the version of Visual Studio, here 2015 (14.0)
We create externals/nasm-2.11.06 below so that the python build script does not
try to download its own nasm instead using the one we installed above (the python
build script fails to mark its nasm as executable, and therefore errors out)
First run::
echo 'set PROGRAMFILES(x86)=%PROGRAMFILES% (x86)' > run.bat && \
echo 'PCbuild\\build.bat -e --no-tkinter -c Release -p %1 -t Build "/p:PlatformToolset=v140"' >> run.bat && \
mkdir -p externals/nasm-2.11.06 && \
chmod +x run.bat
For 64-bit ::
./run.bat x64 || echo '\n\nPython compilation failed!'
./PCbuild/amd64/python.exe Lib/test/regrtest.py -u network,cpu,subprocess,urlfetch
./PCbuild/amd64/python.exe /cygwin64/home/kovid/build/calibre/setup/installer/windows/install_python.py /cygwin64/home/kovid/sw/private
For 32-bit::
./run.bat Win32 || echo '\n\nPython compilation failed!'
./PCbuild/python.exe Lib/test/regrtest.py -u network,cpu,subprocess,urlfetch
./PCbuild/python.exe /cygwin64/home/kovid/build/calibre/setup/installer/windows/install_python.py /cygwin64/home/kovid/sw/private
Make sure ~/sw/private/python is in your PATH
Basic dependencies
--------------------
Install cmake, WiX (WiX is used to generate the .msi installer)
You have to
Set CMAKE_PREFIX_PATH environment variable to C:\cygwin64\home\kovid\sw
This is where all dependencies will be installed.
Run::
python /cygwin64/home/kovid/build/calibre/setup/vcvars.py > ~/.vcvars
Add `source ~/.vcvars` to `~/.zshenv`
This will allow you to use the Visual Studio tools in the cygwin shell.
Install perl and ruby (needed to build openssl and qt):
Perl: http://www.activestate.com/activeperl
Ruby: http://rubyinstaller.org/
Put both perl.exe and ruby.exe in the PATH
setuptools
--------------
Download and extract setuptools from https://pypi.python.org/pypi/setuptools/
Run::
cd ~/sw/build/setuptools-* && sed -i.bak 's/zip_safe\s*=\s*True/zip_safe=False/' setup.py && \
python setup.py install
Miscellaneous python packages
--------------------------------------
Run::
~/sw/private/python/Scripts/easy_install.exe --always-unzip -U python-dateutil dnspython mechanize pygments pyreadline pycrypto
# cssutils install has a harmless error, so do it separately
~/sw/private/python/Scripts/easy_install.exe --always-unzip -U cssutils
pywin32
----------
Run::
git clone --depth 1 https://github.com/kovidgoyal/pywin32.git
chmod +x swig/swig.exe
export plat= win32 or win-amd64
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat; && \
python setup.py -q build --plat-name=$plat;
# Do this repeatedly until you stop getting .manifest file errors
python setup.py -q install
rm ~/sw/private/python/Lib/site-packages/*.chm
SQLite
---------
https://www.sqlite.org/download.html
Put sqlite3*.h from the sqlite windows amalgamation in ~/sw/include
APSW
-----
https://github.com/rogerbinns/apsw/releases
python setup.py fetch --all --missing-checksum-ok build --enable-all-extensions install test
OpenSSL
--------
https://www.openssl.org/source/
For 32-bit::
winenv perl Configure VC-WIN32 enable-static-engine --prefix=C:/cygwin64/home/kovid/sw/private/openssl && \
winenv ms\\do_ms.bat && winenv nmake -f ms\\ntdll.mak && winenv nmake -f ms\\ntdll.mak test && winenv nmake -f ms\\ntdll.mak install
For 64-bit::
winenv perl Configure VC-WIN64A enable-static-engine --prefix=C:/cygwin64/home/kovid/sw/private/openssl && \
winenv ms\\do_win64a.bat && winenv nmake -f ms\\ntdll.mak && winenv nmake -f ms\\ntdll.mak test && winenv nmake -f ms\\ntdll.mak install
ICU
-------
Download the win32 *source* .zip from http://www.icu-project.org/download
Extract to `~/sw/private`
The following *must be run in the VS Command Prompt*, not the cygwin shell
cd to <ICU>\source::
set PATH=%PATH%;C:\cygwin64\bin
dos2unix runConfigureICU
bash ./runConfigureICU Cygwin/MSVC
make
Make sure the folder containing the ICU dlls is in the PATH. ($SW/private/icu/source/lib)
This is needed for building Qt.
zlib
------
http://www.zlib.net/
Build with::
winenv nmake -f win32/Makefile.msc && \
nmake -f win32/Makefile.msc test && \
cp zlib1.dll* ~/sw/bin && cp zlib.lib zdll.* ~/sw/lib/ && cp zconf.h zlib.h ~/sw/include/
jpeg-8
-------
Get the source code from: https://github.com/libjpeg-turbo/libjpeg-turbo/releases
Run::
chmod +x cmakescripts/* && mkdir -p build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWITH_JPEG8=1 .. && \
nmake && \
cp sharedlib/jpeg8.dll* ~/sw/bin/ && cp sharedlib/jpeg.lib ~/sw/lib/ && cp jconfig.h ../jerror.h ../jpeglib.h ../jmorecfg.h ~/sw/include
libpng
---------
Download the libpng .zip source file from:
http://www.libpng.org/pub/png/libpng.html
Run::
cmake -G "NMake Makefiles" -DPNG_SHARED=1 -DCMAKE_BUILD_TYPE=Release -DZLIB_INCLUDE_DIR=C:/cygwin64/home/kovid/sw/include -DZLIB_LIBRARY=C:/cygwin64/home/kovid/sw/lib/zdll.lib . && \
nmake && cp libpng*.dll ~/sw/bin/ && cp libpng*.lib ~/sw/lib/ && cp pnglibconf.h png.h pngconf.h ~/sw/include/
freetype
-----------
Get the source from: http://download.savannah.gnu.org/releases/freetype/
The following will build freetype both as a static (freetype262MT.lib) and as a dynamic library (freetype.dll and freetype.lib)
Run::
find . -name ftoption.h -exec sed -i.bak '/FT_BEGIN_HEADER/a #define FT_EXPORT(x) __declspec(dllexport) x\n#define FT_EXPORT_DEF(x) __declspec(dllexport) x' {} \;
winenv devenv builds/windows/vc2010/freetype.sln /upgrade
export PL=x64 (change to Win32 for 32 bit build)
winenv msbuild.exe builds/windows/vc2010/freetype.sln /t:Build /p:Platform=$PL /p:Configuration="Release Multithreaded"
rm -f ~/sw/lib/freetype*; cp ./objs/vc2010/$PL/freetype*MT.lib ~/sw/lib/
rm -rf ~/sw/include/freetype2; cp -rf include ~/sw/include/freetype2 && rm -rf ~/sw/include/freetype2/internal
sed -i.bak s/StaticLibrary/DynamicLibrary/ builds/windows/vc2010/freetype.vcxproj
winenv msbuild.exe builds/windows/vc2010/freetype.sln /t:Build /p:Platform=$PL /p:Configuration="Release Multithreaded"
rm -f ~/sw/bin/freetype*; cp ./objs/vc2010/$PL/freetype*MT.dll ~/sw/bin/ && cp ./objs/vc2010/$PL/freetype*MT.lib ~/sw/lib/freetype.lib
expat
--------
Get from: http://sourceforge.net/projects/expat/files/expat/
Run::
mkdir -p build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release .. && \
nmake && \
cp expat.dll ~/sw/bin/ && cp expat.lib ~/sw/lib/ && \
cp ../lib/expat.h ../lib/expat_external.h ~/sw/include
libxml2
-------------
Get it from: ftp://xmlsoft.org/libxml2/
Run::
cd win32 && \
cscript.exe configure.js include=C:/cygwin64/home/kovid/sw/include lib=C:/cygwin64/home/kovid/sw/lib prefix=C:/cygwin64/home/kovid/sw zlib=yes iconv=no && \
winenv nmake /f Makefile.msvc && \
cd .. && \
rm -rf ~/sw/include/libxml2; mkdir -p ~/sw/include/libxml2/libxml && cp include/libxml/*.h ~/sw/include/libxml2/libxml/ && \
find . -type f \( -name "*.dll" -o -name "*.dll.manifest" \) -exec cp "{}" ~/sw/bin/ \; && \
find . -name libxml2.lib -exec cp "{}" ~/sw/lib/ \;
libxslt
---------
Get it from: ftp://xmlsoft.org/libxml2/
Run::
cd win32 && \
cscript.exe configure.js include=C:/cygwin64/home/kovid/sw/include include=C:/cygwin64/home/kovid/sw/include/libxml2 lib=C:/cygwin64/home/kovid/sw/lib prefix=C:/cygwin64/home/kovid/sw zlib=yes iconv=no &&\
sed -i 's/#define snprintf _snprintf//' ../libxslt/win32config.h && \
find . -name 'Makefile*' -exec sed -i 's|/OPT:NOWIN98||' {} \; && \
winenv nmake /f Makefile.msvc && \
rm -rf ~/sw/include/libxslt; mkdir -p ~/sw/include/libxslt ~/sw/include/libexslt && \
cd .. && \
cp libxslt/*.h ~/sw/include/libxslt/ && cp libexslt/*.h ~/sw/include/libexslt/ && \
find . -type f \( -name "*.dll" -o -name "*.dll.manifest" \) -exec cp "{}" ~/sw/bin/ \; && \
find . -name 'lib*xslt.lib' -exec cp "{}" ~/sw/lib/ \;
lxml
------
Get the source from: http://pypi.python.org/pypi/lxml
Change the include dirs and lib dirs by editing setupinfo.py and changing the
library_dirs() function to return::
return ['C:/cygwin64/home/kovid/sw/lib']
and the include_dirs() function to return::
return ['C:/cygwin64/home/kovid/sw/include/libxml2', 'C:/cygwin64/home/kovid/sw/include']
Run::
python setup.py install
Python Imaging Library
------------------------
Download from http://pypi.python.org/pypi/Pillow/
Edit setup.py setting the ROOT values, like this::
SW = r'C:\cygwin64\home\kovid\sw'
JPEG_ROOT = ZLIB_ROOT = FREETYPE_ROOT = (SW+r'\lib', SW+r'\include')
Set zip_safe=False
Build and install with::
python setup.py install
poppler
-------------
http://poppler.freedesktop.org
Edit poppler/poppler-config.h.cmake removing the macro definition of fmax (it
is present in VS 2015 and the macro def causes errors)
Run::
sed -i 's/#define snprintf _snprintf/#include <algorithm>/' config.h.cmake && \
mkdir build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DENABLE_CPP=0 .. && \
nmake && cp utils/*.exe* ~/sw/bin
podofo
----------
Download from http://podofo.sourceforge.net/download.html
Run::
mkdir build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWANT_LIB64=FALSE -DPODOFO_BUILD_SHARED=TRUE -DPODOFO_BUILD_STATIC=False -DFREETYPE_INCLUDE_DIR="C:/cygwin64/home/kovid/sw/include/freetype2" .. && \
nmake podofo_shared && \
rm -rf ~/sw/include/podofo; mkdir ~/sw/include/podofo && cp podofo_config.h ~/sw/include/podofo && cp -r ../src/* ~/sw/include/podofo/ && \
cp "`find . -name '*.dll'`" ~/sw/bin/ && cp "`find . -name '*.lib'`" ~/sw/lib/
ImageMagick
--------------
Get the source from: http://www.imagemagick.org/download/windows/ImageMagick-windows.zip
Unzip it and then run::
chmod +x `find . -name '*.exe'`
Open configure.sln and build it to create configure.exe
Run configure.exe set 32/64 bit disable OpenMP
Now open VisualMagick/VisualDynamicMT.sln set to Release
Remove the UTIL_IMdisplay and CORE_Magick++ projects.
F7 for build solution.
netifaces
------------
https://pypi.python.org/pypi/netifaces
Run::
python setup.py build && cp `find build/ -name '*.pyd'` ~/sw/private/python/Lib/site-packages/
psutil
--------
https://pypi.python.org/pypi/psutil
Run::
python setup.py build && rm -rf ~/sw/private/python/Lib/site-packages/psutil && cp -r build/lib.win*/psutil ~/sw/private/python/Lib/site-packages/
easylzma
----------
This is only needed to build the portable installer.
Get it from http://lloyd.github.com/easylzma/ (use the trunk version)
Run cmake and build the Visual Studio solution (generates CLI tools and dll and
static lib automatically)
chmlib
-------
Download the zip source code from: http://www.jedrea.com/chmlib/
Run::
cd src && unzip ../ChmLib-ds6.zip
winenv devenv ChmLib.dsw /upgrade
Then open ChmLib.sln in Visual Studio, change the configuration to Release
(Win32|x64) and build solution, this will generate a static library in
Release/ChmLib.lib
Qt
--------
Download Qt (5.5.1) sourcecode (.zip) from: http://download.qt-project.org/official_releases/qt/
* Extract it to C:\qt (the default location for building $SW/build) does
not work as Qt's build system generates paths that are too long for
windows when used from there.
* Make sure the folder containing the ICU dlls is in the PATH. ($SW/private/icu/source/lib)
* Slim down Qt by not building various things we dont need. Edit
:file:`qtwebkit/Tools/qmake/mkspecs/features/configure.prf` and remove
build_webkit2. Edit qt.pro and comment out the addModule() lines for
qtxmlpatterns, qtdeclarative, qtquickcontrols, qtfeedback,
qtpim, qtwebsockets, qtwebchannel, qttools, qtwebkit-examples, qt3d,
qt-canvas3d, qtgraphicaleffects, qtscript, qtquick1, qtdocgallery,
qtwayland, qtenginio, qtwebengine, qtdoc. Change the addModule line for
qtwebkit to depend only on qtbase and qtmultimedia. Remove qtdeclarative
from all addModule() lines where is is an optional dependency.
* Qt uses its own routine to locate and load "system libraries" including
the openssl libraries needed for "Get Books". This means that we have to
apply the following patch to have Qt load the openssl libraries bundled
with calibre:
--- qtbase/src/corelib/plugin/qsystemlibrary.cpp 2011-02-22 05:04:00.000000000 -0700
+++ qtbase/src/corelib/plugin/qsystemlibrary.cpp 2011-04-25 20:53:13.635247466 -0600
@@ -110,7 +110,7 @@ HINSTANCE QSystemLibrary::load(const wch
#if !defined(QT_BOOTSTRAPPED)
if (!onlySystemDirectory)
- searchOrder << QFileInfo(qAppFileName()).path();
+ searchOrder << (QFileInfo(qAppFileName()).path().replace(QLatin1Char('/'), QLatin1Char('\\')) + QString::fromLatin1("\\app\\DLLs\\"));
+ searchOrder << (QFileInfo(qAppFileName()).path().replace(QLatin1Char('/'), QLatin1Char('\\')) + QString::fromLatin1("\\DLLs\\"));
#endif
searchOrder << qSystemDirectory();
-no-plugin-manifests is needed so that loading the plugins does not fail looking for the CRT assembly
Now, run configure and make (we have to make sure the windows perl and not cygwin perl is used)::
chmod +x configure.bat qtbase/configure.* gnuwin32/bin/*
rm -rf build && mkdir build && cd build
winenv ../configure.bat -prefix C:/cygwin64/home/kovid/sw/private/qt -ltcg -opensource -release -platform win32-msvc2015 -mp -confirm-license -nomake examples -nomake tests -no-plugin-manifests -icu -openssl -I C:/cygwin64/home/kovid/sw/private/openssl/include -L C:/cygwin64/home/kovid/sw/private/openssl/lib -I C:/cygwin64/home/kovid/sw/private/icu/source/common -I C:/cygwin64/home/kovid/sw/private/icu/source/i18n -L C:/cygwin64/home/kovid/sw/private/icu/source/lib -no-angle -opengl desktop
PATH=/cygdrive/c/qt/gnuwin32/bin:$PATH winenv nmake
rm -rf ~/sw/private/qt && nmake install
Add $SW/private/qt/bin to PATH
SIP
-----
Available from: http://www.riverbankcomputing.co.uk/software/sip/download ::
python configure.py -p win32-msvc2015 && winenv nmake && nmake install
PyQt5
----------
Compiling instructions::
rm -rf build && mkdir build && cd build
winenv python ../configure.py -c -j5 --no-designer-plugin --no-qml-plugin --verbose --confirm-license
winenv nmake && rm -rf ~/sw/private/python/Lib/site-packages/PyQt5 && nmake install
libimobiledevice
------------------
See libimobiledevice_notes.rst
optipng
----------
http://optipng.sourceforge.net/
Compiling instructions::
sed -i.bak 's/\$</%s/' src/libpng/scripts/makefile.vcwin32 && \
winenv nmake -f build/visualc.mk && \
cp src/optipng/optipng.exe ~/sw/bin/optipng-calibre.exe
mozjpeg
----------
https://github.com/mozilla/mozjpeg/releases
Compiling instructions::
mkdir -p build && cd build && \
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release -DWITH_TURBOJPEG:BOOL=FALSE .. && \
nmake && \
cp jpegtran-static.exe ~/sw/bin/jpegtran-calibre.exe && \
cp cjpeg-static.exe ~/sw/bin/cjpeg-calibre.exe
calibre
---------
Take a linux calibre tree on which you have run the following command::
python setup.py stage1
and copy it to windows.
Run::
python setup.py build
python setup.py win32_freeze
This will create the .msi in the dist directory.