diff --git a/VERSION b/VERSION
index 084e244..d1428a7 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-3.6.0
\ No newline at end of file
+3.6.1
\ No newline at end of file
diff --git a/gravity-sync.sh b/gravity-sync.sh
index 3ac67e0..9cdcca8 100755
--- a/gravity-sync.sh
+++ b/gravity-sync.sh
@@ -3,7 +3,7 @@ SCRIPT_START=$SECONDS
 
 # GRAVITY SYNC BY VMSTAN #####################
 PROGRAM='Gravity Sync'
-VERSION='3.6.0'
+VERSION=$(<VERSION)
 
 # For documentation or downloading updates visit https://github.com/vmstan/gravity-sync
 # Requires Pi-Hole 5.x or higher already be installed, for help visit https://pi-hole.net
diff --git a/prep/gs-install.sh b/prep/gs-install.sh
deleted file mode 100644
index fd67259..0000000
--- a/prep/gs-install.sh
+++ /dev/null
@@ -1,279 +0,0 @@
-# GRAVITY SYNC BY VMSTAN #####################
-# gs-install.sh ##############################
-
-# For documentation or downloading updates visit https://github.com/vmstan/gravity-sync
-# This code will be called from a curl call via installation instructions
-
-# Run this script on your primary Pi-hole to aid in preparing for Gravity Sync installation.
-
-set -e
-
-# Script Colors
-RED='\033[0;91m'
-GREEN='\033[0;92m'
-CYAN='\033[0;96m'
-YELLOW='\033[0;93m'
-PURPLE='\033[0;95m'
-BLUE='\033[0;94m'
-BOLD='\033[1m'
-NC='\033[0m'
-
-# Variables
-CROSSCOUNT="0"
-PHFAILCOUNT="0"
-CURRENTUSER=$(whoami)
-
-# Header
-echo -e ""
-echo -e "         ..::-----::..                          ..::------::.         "
-echo -e "      .:----:::::::----:.                    .:::--:::::---===-:      "
-echo -e "    :---:.           .:---:                +##+:.          .:-===-.   "
-echo -e "  .---:.                :---:            -*##*:               .-===:  "
-echo -e " .---.                    :---:        -++*+.                   .==+- "
-echo -e " ---.          =            :---:    :====.           -          .=++."
-echo -e ":--:          -=-.            :---::---:.            -=-.         :++="
-echo -e "---.      .:-=====-:..          ------.          .:-=====-:..     .+++"
-echo -e "---.        .:===-.            :------:            .:===-.        :+++"
-echo -e ".--:          .=:            :---:  :---:             =:          -++-"
-echo -e " :--:          ..          .---:.     :--::           ..         -=+= "
-echo -e "  :--:                   .---:.         :-:::                   -===. "
-echo -e "   :---:               :---:              :::::              .:====   "
-echo -e "     :---::..     ..::---:.                 ::::::..     ..:-===-.    "
-echo -e "       .::-----------::.                      .::---------===-:       "
-echo -e ""
-echo -e "${YELLOW}Gravity Sync by ${BLUE}@vmstan${NC}"
-echo -e "${CYAN}https://github.com/vmstan/gravity-sync${NC}"
-echo -e "========================================================"
-echo -e "[${GREEN}✓${NC}] Checking Short Range Sensors"
-
-# Check Root
-echo -e "[${YELLOW}i${NC}] ${YELLOW}Validating System Authorization${NC}"
-if [ ! "$EUID" -ne 0 ]
-then
-    echo -e "[${GREEN}✓${NC}] Current User (${CURRENTUSER}) is ROOT"
-    LOCALADMIN="root"
-else
-    if hash sudo 2>/dev/null
-    then
-        echo -e "[${GREEN}✓${NC}] Sudo Utility Detected"
-        # Check Sudo
-        sudo --validate
-        if [ "$?" != "0" ]
-        then
-            echo -e "[${RED}✗${NC}] Current User (${CURRENTUSER}) Cannot SUDO"
-            CROSSCOUNT=$((CROSSCOUNT+1))
-            LOCALADMIN="nosudo"
-        else
-            echo -e "[${GREEN}✓${NC}] Current User (${CURRENTUSER}) Has SUDO Powers"
-            LOCALADMIN="sudo"
-        fi
-    else
-        echo -e "[${RED}✗${NC}] Sudo Utility Not Detected"
-        CROSSCOUNT=$((CROSSCOUNT+1))
-        LOCALADMIN="nosudo"
-    fi
-    
-    if [ "$LOCALADMIN" != "sudo" ]
-    then
-        echo -e "[${RED}✗${NC}] Current User (${CURRENTUSER}) Cannot SUDO"
-        CROSSCOUNT=$((CROSSCOUNT+1))
-        LOCALADMIN="nosudo"
-    fi
-fi
-
-echo -e "[${YELLOW}i${NC}] ${YELLOW}Scanning for Required Components${NC}"
-# Check OpenSSH
-if hash ssh 2>/dev/null
-then
-    echo -e "[${GREEN}✓${NC}] OpenSSH Binaries Detected"
-else
-    echo -e "[${RED}✗${NC}] OpenSSH Binaries Not Installed"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-# Check Rsync
-if hash rsync 2>/dev/null
-then
-    echo -e "[${GREEN}✓${NC}] RSYNC Binaries Detected"
-else
-    echo -e "[${RED}✗${NC}] RSYNC Binaries Not Installed"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-# Check Sudo
-if hash sudo 2>/dev/null
-then
-    echo -e "[${GREEN}✓${NC}] SUDO Binaries Detected"
-else
-    echo -e "[${RED}✗${NC}] SUDO Binaries Not Installed"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-# Check Crontab
-if hash crontab 2>/dev/null
-then
-    echo -e "[${GREEN}✓${NC}] CRONTAB Binaries Detected"
-else
-    echo -e "[${RED}✗${NC}] CRONTAB Binaries Not Installed"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-# Check SQLITE3
-if hash sqlite3 2>/dev/null
-then
-    echo -e "[${GREEN}✓${NC}] SQLITE3 Binaries Detected"
-else
-    echo -e "[${RED}✗${NC}] SQLITE3 Binaries Not Installed"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-# Check GIT
-if hash git 2>/dev/null
-then
-    echo -e "[${GREEN}✓${NC}] GIT Binaries Detected"
-else
-    echo -e "[${RED}✗${NC}] GIT Binaries Not Installed"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-echo -e "[${YELLOW}i${NC}] ${YELLOW}Performing Warp Core Diagnostics${NC}"
-# Check Pihole
-if hash pihole 2>/dev/null
-then
-    echo -e "[${GREEN}✓${NC}] Local Pi-hole Install Detected"
-else
-    echo -e "[${PURPLE}!${NC}] ${PURPLE}No Local Pi-hole Install Detected${NC}"
-    # echo -e "[${PURPLE}!${NC}] ${PURPLE}Attempting To Compensate${NC}"
-    if hash docker 2>/dev/null
-    then
-        echo -e "[${GREEN}✓${NC}] Docker Binaries Detected"
-        
-        if [ "$LOCALADMIN" == "sudo" ]
-        then
-            FTLCHECK=$(sudo docker container ls | grep 'pihole/pihole')
-        elif [ "$LOCALADMIN" == "nosudo" ]
-        then
-            echo -e "[${PURPLE}!${NC}] ${PURPLE}No Docker Pi-hole Container Detected (unable to scan)${NC}"
-            # CROSSCOUNT=$((CROSSCOUNT+1))
-            PHFAILCOUNT=$((PHFAILCOUNT+1))
-        else
-            FTLCHECK=$(docker container ls | grep 'pihole/pihole')
-        fi
-        
-        if [ "$LOCALADMIN" != "nosudo" ]
-        then
-            if [ "$FTLCHECK" != "" ]
-            then
-                echo -e "[${GREEN}✓${NC}] Pi-Hole Docker Container Detected"
-            else
-                echo -e "[${PURPLE}!${NC}] ${PURPLE}No Docker Pi-hole Container Detected${NC}"
-                # CROSSCOUNT=$((CROSSCOUNT+1))
-                PHFAILCOUNT=$((PHFAILCOUNT+1))
-            fi
-        fi
-    elif hash podman 2>/dev/null
-    then
-        echo -e "[${GREEN}✓${NC}] Podman Binaries Detected"
-        
-        if [ "$LOCALADMIN" == "sudo" ]
-        then
-            FTLCHECK=$(sudo podman container ls | grep 'pihole/pihole')
-        elif [ "$LOCALADMIN" == "nosudo" ]
-        then
-            echo -e "[${PURPLE}!${NC}] ${PURPLE}No Podman Pi-hole Container Detected (unable to scan)${NC}"
-            # CROSSCOUNT=$((CROSSCOUNT+1))
-            PHFAILCOUNT=$((PHFAILCOUNT+1))
-        else
-            FTLCHECK=$(podman container ls | grep 'pihole/pihole')
-        fi
-        
-        if [ "$LOCALADMIN" != "nosudo" ]
-        then
-            if [ "$FTLCHECK" != "" ]
-            then
-                echo -e "[${GREEN}✓${NC}] Pi-Hole Podman Container Detected"
-    else
-                echo -e "[${PURPLE}!${NC}] ${PURPLE}No Podman Pi-hole Container Detected${NC}"
-                # CROSSCOUNT=$((CROSSCOUNT+1))
-                PHFAILCOUNT=$((PHFAILCOUNT+1))
-            fi
-        fi
-    else
-        # echo -e "[${RED}✗${NC}] No Local Pi-hole Install Detected"
-        echo -e "[${PURPLE}!${NC}] ${PURPLE}No Docker Pi-hole Alternative Detected${NC}"
-        # CROSSCOUNT=$((CROSSCOUNT+1))
-        PHFAILCOUNT=$((PHFAILCOUNT+1))
-    fi
-fi
-
-if [ "$PHFAILCOUNT" != "0" ]
-then
-    echo -e "[${RED}✗${NC}] No Usable Pi-hole Install Detected"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-# echo -e "[${YELLOW}i${NC}] ${YELLOW}Target Folder Analysis${NC}"
-if [ "$GS_INSTALL" == "secondary" ]
-then
-    if [ "$LOCALADMIN" == "sudo" ]
-    then
-        THISDIR=$(pwd)
-        if [ "$THISDIR" != "$HOME" ]
-        then
-            echo -e "[${RED}✗${NC}] ${CURRENTUSER} Must Install to $HOME"
-            echo -e "[${PURPLE}!${NC}] ${PURPLE}Use 'root' Account to Install in $THISDIR${NC}"
-            CROSSCOUNT=$((CROSSCOUNT+1))
-        fi
-    fi
-fi
-
-if [ -d gravity-sync ]
-then
-    echo -e "[${RED}✗${NC}] Folder gravity-sync Already Exists"
-    echo -e "[${PURPLE}!${NC}] ${PURPLE}Use './gravity-sync.sh update' to Update Instead${NC}"
-    CROSSCOUNT=$((CROSSCOUNT+1))
-fi
-
-echo -e "[${YELLOW}i${NC}] ${YELLOW}Status Report${NC}"
-# Combine Outputs
-if [ "$CROSSCOUNT" != "0" ]
-then
-    echo -e "[${RED}*${NC}] ${RED}${CROSSCOUNT} Critical Issue(s) Detected${NC}"
-    echo -e "[${PURPLE}!${NC}] ${PURPLE}Please Correct Failures and Re-Execute${NC}"
-    echo -e "[${YELLOW}i${NC}] ${YELLOW}Installation Exiting (without changes)${NC}"
-else
-    echo -e "[${YELLOW}i${NC}] ${YELLOW}Executing Gravity Sync Deployment${NC}"
-    
-    if [ "$LOCALADMIN" == "sudo" ]
-    then
-        echo -e "[${BLUE}>${NC}] Creating Sudoers.d File"
-        touch /tmp/gs-nopasswd.sudo
-        echo -e "${CURRENTUSER} ALL=(ALL) NOPASSWD: ALL" > /tmp/gs-nopasswd.sudo
-        sudo install -m 0440 /tmp/gs-nopasswd.sudo /etc/sudoers.d/gs-nopasswd
-    fi
-    
-    if [ "$GS_INSTALL" != "secondary" ]
-    then
-        echo -e "[${YELLOW}i${NC}] Gravity Sync Preperation Complete"
-        echo -e "[${YELLOW}i${NC}] Execute on Installer on Secondary"
-        echo -e "[${YELLOW}i${NC}] Check Documentation for Instructions"
-        echo -e "[${YELLOW}i${NC}] Installation Exiting (without changes)"
-    else
-        echo -e "[${BLUE}>${NC}] Creating Gravity Sync Directories"
-            if [ "$GS_DEV" != "" ]
-            then
-                git clone -b ${GS_DEV} https://github.com/vmstan/gravity-sync.git
-            else
-                git clone https://github.com/vmstan/gravity-sync.git
-            fi
-        echo -e "[${BLUE}>${NC}] Starting Gravity Sync Configuration"
-        echo -e "========================================================"
-        ./gravity-sync/gravity-sync.sh configure <&1
-        # echo -e "[${YELLOW}i${NC}] This host is now prepared to configure Gravity Sync!"
-        # echo -e "[${YELLOW}i${NC}] Please run './gravity-sync configure' from $HOME/gravity-sync"
-        # echo -e "[${YELLOW}i${NC}] Visit https://github.com/vmstan/gravity-sync for more instructions."
-    fi
-    
-fi
-
-exit
\ No newline at end of file